Please select your panel type:
Please enter the number of points being used:
Then enter the appropriate values in the form below for each of your points.
When complete, click this button to see how to program your panel via RPS:
Save / Load your configuration
You can use the controls below to save your current configuration inside this browser. (This save type cannot be transferred to any other browser)
If you are connected to the internet and your browser supports it,
you can also or your configuration to/from a file. (This save type could be transferred to another browser or computer)
Point Source
Point Text
Point Index
Area
Relay
RFID
Next Point:
Use the checkboxes to select multiple points to edit at the same time.
Click one checkbox then hold the Shift button and click another check box to select all of the boxes inbetween the two.
When editing the point text, enter ## and it will be replaced with the point number.
e.g. If points 12-22 are selected and you enter "P## Smoke Detector", then it will be replaced with "P12 Smoke Detector" and "P13 Smoke Detector" and so on.
The "All" checkbox in the column header can be used to deselect or select all checkboxes.
Navigate to the "Point Index Descriptions" section as seen below:
Then program the values highlighted in red below:
Point Index Descriptions
Entry
Point Index 1
Point Index 2
Point Index 3
Point Index 4
Point Index 5
Point Index 6
Point Index 7
Point Index 8
Point Index 9
Point Index 10
Point Index 11
Point Index 12
Point Index 13
Point Index 14
Point Index 15
Point Index 16
Point Index 17
Point Index 18
Point Index 19
Point Index 20
Point Index 21
Point Index 22
Point Index 23
Point Index 24
Point Index 25
Point Index 26
Point Index 27
Point Index 28
Point Index 29
Point Index 30
Point Index 31
Navigate to the "Point Indexes 1-16" section as seen below:
Then program the values highlighted in red below:
Point Type
Point Response
Entry Delay
Entry Tone Off
Silent Bell
Ring Until Restored
Audible After 2 Fails
Invisible Point
Buzz On Fault
Watch Point
Relay Response Type
Display as Device
Local While Disarmed
Local While Armed
Disable Restorals
Force Arm Returnable
Bypass Returnable
Bypassable
Swinger Bypass
Report Byp at Occurrence
Defer Bypass Report
Cross Point
Fire Point
Alarm Verify
Resettable
Alarm Abort
Wireless Point Supervision Time
Navigate to the "Point Assignments" section as seen below:
Then program the values highlighted in red below: